聚酰亚胺
膜
材料科学
选择性
巴勒
化学工程
聚合物
傅里叶变换红外光谱
纳米颗粒
气体分离
高分子化学
复合材料
有机化学
纳米技术
催化作用
化学
图层(电子)
生物化学
工程类
作者
Anand Jain,Mohd Zamidi Ahmad,Audrey Linkès,Violeta Martin-Gil,Roberto Castro‐Muñoz,Pavel Izák,Zdeněk Sofer,Werner Hintz,Vlastimil Fíla
出处
期刊:Nanomaterials
[Multidisciplinary Digital Publishing Institute]
日期:2021-03-08
卷期号:11 (3): 668-668
被引量:49
摘要
This work presents the gas separation evaluation of 6FDA-DAM:DABA (3:1) co-polyimide and its enhanced mixed matrix membranes (MMMs) with graphene oxide (GO) and ZIF-8 (particle size of <40 nm). The 6FDA-copolyimide was obtained through two-stage poly-condensation polymerization, while the ZIF-8 nanoparticles were synthesized using the dry and wet method. The MMMs were preliminarily prepared with 1–4 wt.% GO and 5–15 wt.% ZIF-8 filler loading independently. Based on the best performing GO MMM, the study proceeded with making MMMs based on the mixtures of GO and ZIF-8 with a fixed 1 wt.% GO content (related to the polymer matrix) and varied ZIF-8 loadings. All the materials were characterized thoroughly using TGA, FTIR, XRD, and FESEM. The gas separation was measured with 50:50 vol.% CO2:CH4 binary mixture at 2 bar feed pressure and 25 °C. The pristine 6FDA-copolyimide showed CO2 permeability (PCO2) of 147 Barrer and CO2/CH4 selectivity (αCO2/CH4) of 47.5. At the optimum GO loading (1 wt.%), the PCO2 and αCO2/CH4 were improved by 22% and 7%, respectively. A combination of GO (1 wt.%)/ZIF-8 fillers tremendously improves its PCO2; by 990% for GO/ZIF-8 (5 wt.%) and 1.124% for GO/ZIF-8 (10 wt.%). Regrettably, the MMMs lost their selectivity by 16–55% due to the non-selective filler-polymer interfacial voids. However, the hybrid MMM performances still resided close to the 2019 upper bound and showed good performance stability when tested at different feed pressure conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI