3D Modeling of the Solidification Structure Evolution and of the Inter Layer/Track Voids Formation in Metallic Alloys Processed by Powder Bed Fusion Additive Manufacturing

A fully transient discrete-source 3D Additive Manufacturing (AM) process model was coupled with a 3D stochastic solidification structure model to simulate the grain structure evolution quickly and efficiently in metallic alloys processed through Electron Beam Powder Bed Fusion (EBPBF) and Laser Powder Bed Fusion (LPBF) processes. The stochastic model was adapted to rapid solidification conditions of multicomponent alloys processed via multi-layer multi-track AM processes. The capabilities of the coupled model include studying the effects of process parameters (power input, speed, beam shape) and part geometry on solidification conditions and their impact on the resulting solidification structure and on the formation of inter layer/track voids. The multi-scale model assumes that the complex combination of the crystallographic requirements, isomorphism, epitaxy, changing direction of the melt pool motion and thermal gradient direction will produce the observed texture and grain morphology. Thus, grain size, morphology, and crystallographic orientation can be assessed, and the model can assist in achieving better control of the solidification microstructures and to establish trends in the solidification behavior in AM components. The coupled model was previously validated against single-layer laser remelting IN625 experiments performed and analyzed at National Institute of Standards and Technology (NIST) using LPBF systems. In this study, the model was applied to predict the solidification structure and inter layer/track voids formation in IN718 alloys processed by LPBF processes. This 3D modeling approach can also be used to predict the solidification structure of Ti-based alloys processes by EBPBF.