极限抗拉强度
粒度
晶界
相(物质)
共晶体系
延展性(地球科学)
扫描电子显微镜
作者
Wenchen Xu,Kai Huang,Shifeng Wu,Yingying Zong,Debin Shan
标识
DOI:10.1016/s1003-6326(17)60094-3
摘要
Abstract The influence of Mo content on the microstructure and mechanical properties of the Ti-45Al-5Nb- x Mo-0.3Y ( x =0.6, 0.8, 1.0, 1.2) alloys was studied using small ingots produced by non-consumable electrode argon arc melting. The results show that small quantities of β phase are distributed along γ/α 2 lamellar colony boundaries as discontinuous network in the TiAl alloys owing to the segregation of Mo element. The γ phase forms in the interdentritic microsegregation area when the Mo addition exceeds 0.8%. The β and γ phases can be eliminated effectively by subsequent homogenization heat treatment at the temperature above T α . The evolution of the strength, microhardness and ductility at different Mo contents under as-cast and as-homogenization treated conditions was analyzed, indicating that excessive Mo addition is prone to cause the microsegregation, thus decreasing the strength and microhardness obviously, which can be improved effectively by subsequent homogenization heat treatment.
科研通智能强力驱动
Strongly Powered by AbleSci AI