P‐209: Research on Adhesion of Acrylic Photoresist on Different Substrates for OLED Display

Acrylic photoresist could be applied as a functional layer for OLED display, and it is required to be fabricated mainly on the hybrid substrate of metal and inorganic silicide substrate or the polymer substrate. Through simulation, this paper concludes that moderately increasing the silane coupling agent content and moderate crosslinking degree of the material system could contribute to improving the adhesion force at the interface between acrylic photoresist and substrate, thereby avoiding peeling. Four acrylic photoresists named OC1‐4 with different formula are introduced, their adhesion force and peeling performances on different substrates are researched. The experimental results are consistent with that of simulation. Among them, OC1&4 with high content of silane coupling agent did not exhibit peeling on the hybrid substrate and polymer substrate, and their adhesion forces are large enough, making them suitable as functional layers for OLED display.