材料科学
微观结构
接头(建筑物)
压缩(物理)
复合材料
冶金
结构工程
工程类
作者
Shikai Wu,Sheng Liu,Hexin Wang,Shaofei Ren,Bin Xu,Xiaopeng Zhang,Mingyue Sun
标识
DOI:10.1016/j.matdes.2025.113693
摘要
This study elucidates the microstructures and mechanical properties of a 30CrNi2MoV steel/GH4098 joint produced via hot-compression bonding (HCB). Owing to the mutual diffusion of GH4098 and 30CrNi2MoV, the bonding interface becomes an interface band where Al 2 O 3 /Ti(C, N) is distributed on the side near GH4098 and Ti(C, N)/M 23 C 6 is distributed on the side near 30CrNi2MoV. A transition layer occurs between the interface band and 30CrNi2MoV due to the diffusion of austenite stabilization elements dominated by Ni from GH4098 to 30CrNi2MoV. As the hot compression temperature increases, oxides and carbides are thermally dissolved into the matrix and Al 2 O 3 transitions from its δ phase to α phase. As the strain increases, the bonding interface bugles and the interfacial oxide layer is destroyed. The highest interfacial bonding strength is obtained under conditions associated with high temperatures and large deformation .
科研通智能强力驱动
Strongly Powered by AbleSci AI