Restraining Planar Gliding in Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathodes by Combining Bulk and Surface Modification Strategies

Abstract The delamination cracking from planar gliding along the (003) facets and anisotropic lattice strain perpendicular to the (003) facets inevitable lead to degradation of Ni‐rich single‐crystal cathode materials, adversely affecting their cyclability. Herein, we rationally design a single‐crystal LiNi 0.9 Co 0.05 Mn 0.05 O 2 (SC90) cathode with robust chemo‐mechanical properties, in which coherently grown MgO 6 octahedra and BO 4 tetrahedra are incorporated into the lattice, and a stabilizing Mg 3 (BO 3 ) 2 layer is concurrently formed on the particle surface. Multiscale in /ex situ characterizations and theoretical calculations indicate that introducing the MgO 6 and BO 4 units leads to a “pinning effect” within the layered structure. This in turn strongly mitigates mechanical degradation by reducing planar gliding and delamination cracking over extended cycling. Moreover, the Mg 3 (BO 3 ) 2 coating maintains fast lithium diffusion by suppressing parasitic reactions at the cathode|electrolyte interface. The tailored SC90 cathode exhibits a capacity retention of ~88 % after 300 cycles at 5 C rate, significantly outperforming the pristine counterpart (~60 %). Additionally, a pouch‐type full cell with a graphite anode sustains a specific discharge capacity of 177 mAh g −1 after 500 cycles, with 90 % capacity retention. This work highlights the “pining effect” in preventing unfavorable slab sliding and structural deterioration, offering new insights for designing advanced ultrahigh Ni single‐crystal cathodes.