Ultrasound-initiated synthesis of cationic polyacrylamide for oily wastewater treatment: Enhanced interaction between the flocculant and contaminants

Weak interaction between flocculants and oil is a main bottleneck in the treatment of oil-containing wastewater. To solve this problem, a novel flocculant PAB with cationic micro-block structure and hydrophobic groups of benzene rings was synthesized by ultrasound initiated polymerization technique and applied to remove turbidity and oil from water. To avoid unnecessary addition of reagents in traditional template and micellar copolymerization, surface-active monomer benzyl(methacryloyloxyethyl)dimethylammonium chloride (BMDAC) with self-assembly ability in aqueous solution was employed to synthesize flocculants. The critical association concentration of BMDAC measured by conductivity and surface tension methods was 0.014 mol·L−1. The results of reactivity ratio, statistical analysis of sequence-length distribution and 1H NMR provided evidence for the synthesis of copolymer with cationic micro-block. In addition, the apparent viscosity measurement indicated that PAB had an obvious hydrophobic association property. Finally, flocculation tests demonstrated that flocculation performance was greatly improved by adding PAB and the removal rate of oil and turbidity both reached the maximum (87.5% and 92%) at dosage of 40 mg·L−1 and pH of 7.0. Flocculation mechanism investigation demonstrated that the cooperation of charge neutralization, adsorption bridging, and hydrophobic association effect played an important role. The formed flocs by PAB was large, compact, difficult to break, and easy to regrow because of the enhanced interaction between flocculants and oil. In summary, this study can provide important reference in the design of organic flocculants in oily wastewater treatment applications.