Measurement algorithm for real front and back curved surfaces of contact lenses

The optical measurement algorithm for the real front and back surfaces of contact lenses from their center to periphery accurately and simultaneously is proposed. It is an algorithm that makes light incident vertically along the curved surfaces of contact lenses under the condition that the difference of curvature radii between the front and back surfaces is small enough within the NA of the optical probe. For this purpose, we adopted time-domain optical coherence tomography (OCT) with translation and rotation mechanisms. The shape, thickness distribution, and curvature radii of both surfaces were estimated with OCT signal analysis and circular approximation. The measured results were compared with the designed values and the measured data from a conventional shape measurement device. The curved shape of both surfaces and thickness were well matched with the designed values from lens center to periphery. In a curvature radius of the front surface, there was a proportional bias with a limit of agreement of − 0.77 % to − 2.09 % , and the correlation coefficient was 0.57. On the back surface, there was no systematic bias, and minimal detectable change was 0.178 mm, in a range of 95% confidential interval. The proposed algorithm well visualized the real shape and optical characteristics of the contact lens with enough accuracy to the design.