Influence of preparation conditions on the physical properties of zein films

Zein is a hydrophobic protein produced from maize. Biodegradable zein films without additional reagents were prepared using various controlled drying conditions. The zein films were transparent. Mechanical properties (tensile strength and puncture strength), gas permeability, and water vapor permeability (WVP) of the zein films were measured. The tensile strengths of the zein films were between 7 and 30 MPa and the puncture strengths between 37 and 191 MPa. The zein films had higher oxygen permeability than carbon dioxide permeability. The lowest WVP of the zein film was 0.012×10−9 g·m/m2·s·Pa. We found differences in the WVP between the sides of the zein films; i.e., the air side of the zein film had a higher WVP than the basal side of the zein film when the films were exposed to high humidity during testing. This indicates a relationship between the WVP of the zein film and the contact angle of the zein film. The mechanical properties of the zein film depended on the drying conditions during preparation. Zein films with various useful physical mechanical properties were produced.