谐波传动
花键(机械)
谐波
结构工程
接触分析
工程类
机械工程
物理
声学
有限元法
作者
Xingyu He,Hesheng Feng,Menghan Zhang,Zaishang Shen,Boyang Liu,Peng Hao Su,Haoyu Liu,Yabin Guan
出处
期刊:Machines
[Multidisciplinary Digital Publishing Institute]
日期:2024-11-05
卷期号:12 (11): 777-777
被引量:4
标识
DOI:10.3390/machines12110777
摘要
Harmonic drives (HDs) with short flexspline (FS) always suffer from small meshing areas and severe stress concentration caused by large cone angles when a short FS is assembled and loaded. To address this issue, a tooth longitudinal modification method for the circular spline (CS) with a double circular arc common-tangent tooth profile (DCTP) is proposed. Using neutral layer and envelope conjugation theories, a mathematical model of the conventional straight CS tooth was developed. A shaping cutter for this tooth profile was then designed through coordinate transformation and meshing principles. The proposed longitudinal modification for the CS was achieved by adjusting the cutter’s trajectory. A precise finite element model of the HD was developed, revealing that tooth longitudinal modification can reduce the maximum contact pressure by 69.6% and significantly increase the contact area for HDs with short FS. This work provides valuable technical references for improving the contact state of HDs with short FS.
科研通智能强力驱动
Strongly Powered by AbleSci AI