High-Pressure Gravimetric Measurements for Binary Gas Adsorption Equilibria and Comparisons with Ideal Adsorbed Solution Theory (IAST)

Measurements of gas mixture adsorption equilibria at high pressures are important for assessing actual adsorbent selectivities but are often out of reach, given the challenging nature of the required experiments. Here, we report a high-pressure gravimetric binary gas adsorption equilibrium measurement system based on simultaneous gas density and mixture adsorption measurements in a single gas cell coupled to a magnetic-suspension balance. Compared to traditional techniques which rely on analytical measurements of gas composition, this approach does not require any sampling. Adsorption measurements of two gas mixtures (0.500 N₂ + 0.500 CH₄ and 0.400 N₂ + 0.600 CO₂, mole fraction) on a commercially available molecular sieve (NaY, sodium molecular sieve type Y) were carried out in the temperature range 282 to 325 K with a pressure up to 10 MPa. A prediction method for the gas mixture adsorption equilibria in a closed system using the ideal adsorbed solution theory (IAST) model was used to compare the experimental results. For binary mixtures of components with similar adsorption capacities (here N₂ and CH₄), the system can measure the adsorption equilibria at pressures higher than 1.0 MPa and the result agrees well with the IAST model prediction. For two gases with very different adsorption capacities, the uncertainty in the adsorption equilibrium measurement is much larger. The dominant uncertainty source is the gas density measurement, whose uncertainty could potentially be cut to half if the current titanium sinker is replaced with a sinker made of single-crystal silicon and with a larger volume.