Enhancing single-cell encapsulation in droplet microfluidics with fine-tunable on-chip sample enrichment

Abstract Single-cell encapsulation in droplet microfluidics is commonly hindered by the tradeoff between cell suspension density and on-chip focusing performance. In this study, we introduce a novel droplet microfluidic chip to overcome this challenge. The chip comprises a double spiral focusing unit, a flow resistance-based sample enrichment module with fine-tunable outlets, and a crossflow droplet generation unit. Utilizing a low-density cell/bead suspension (2 × 10 6 objects/mL), cells/beads are focused into a near-equidistant linear arrangement within the double spiral microchannel. The excess water phase is diverted while cells/beads remain focused and sequentially encapsulated in individual droplets. Focusing performance was assessed through numerical simulations and experiments at three flow rates (40, 60, 80 μL/min), demonstrating successful focusing at 40 and 80 μL/min for beads and cells, respectively. In addition, both simulation and experimental results revealed that the flow resistance at the sample enrichment module is adjustable by punching different outlets, allowing over 50% of the aqueous phase to be removed. YOLOv8n-based droplet detection algorithms realized the counting of cells/beads in droplets, statistically demonstrating single-cell and bead encapsulation rates of 72.2% and 79.2%, respectively. All the results indicate that this on-chip sample enrichment approach can be further developed and employed as a critical component in single-cell encapsulation in water-in-oil droplets.