THE NEW INERTIA DYNAMOMETER FOR FRICTION AND WEARTESTING OF BRAKE PADS AND BRAKE DISCS

For the sake of driving safety, the right choice of the brake pad friction material and its manufacturing processes to obtain the appropriate tribological properties is a matter of priority for brake pad manufacturers. Determination of the tribological properties is best done in component tests, i.e. in the setup: brake pads – brake disc. At the request of one of the domestic brake pad manufacturers, as part of the POIR project, an inertia dynamometer for testing friction and wear of brake pads and brake discs was developed and manufactured, which was given the symbol T-33. A test methodology was developed based on the “Cold application section” procedure described in SAE J2522:2003. The T-33 inertia dynamometer is designed for testing brake pads and brake discs intended for five vehicles representing the passenger vehicle class and vans. The paper presents the new test stand, test methodology, and results of verification tests of the T-33 dynamometer (interlaboratory comparison tests) performed on the Cinquecento vehicle brake setup.