UAV Swarm-Enabled Collaborative Post-Disaster Communications in Low Altitude Economy via a Two-Stage Optimization Approach

The low-altitude economy (LAE), as a new economic paradigm, plays an indispensable role in cargo transportation, healthcare, infrastructure inspection, and especially post-disaster communications. Specifically, unmanned aerial vehicles (UAVs), as one of the core technologies of the LAE, can be deployed to provide communication coverage, facilitate data collection, and relay data for trapped users, thereby significantly enhancing the efficiency of post-disaster response efforts. However, conventional UAV self-organizing networks exhibit low reliability in long-range cases due to their limited onboard energy and transmit ability. Therefore, in this paper, we design an efficient and robust UAV-swarm enabled collaborative self-organizing network to facilitate post-disaster communications. Specifically, a ground device transmits data to UAV swarms, which then use collaborative beamforming (CB) technique to form virtual antenna arrays and relay the data to a remote access point (AP) efficiently. Then, we formulate a rescue-oriented post-disaster transmission rate maximization optimization problem (RPTRMOP), aimed at maximizing the transmission rate of the whole network. Given the challenges of solving the formulated RPTRMOP by using traditional algorithms, we propose a two-stage optimization approach to address it.In the first stage, the optimal multi-path traffic routing and the theoretical upper bound on the transmission rate of the network are derived.In the second stage, we transform the formulated RPTRMOP into a variant named V-RPTRMOP based on the obtained optimal multi-path traffic routing, aimed at rendering the actual transmission rate closely approaches its theoretical upper bound by optimizing the excitation current weight and the placement of each participating UAV via a diffusion model-enabled particle swarm optimization (DM-PSO) algorithm. Simulation results show the effectiveness of the proposed two-stage optimization approach in improving the transmission rate of the constructed network, which demonstrates the great potential for post-disaster communications. Moreover, the robustness of the constructed network is also validated via evaluating the impact of three unexpected situations on the system transmission rate.