Temperature measurement in laser–metal processing using optical sensing: Radiometric calibration and validation of a multispectral camera

In laser–metal processing such as Laser-based Powder Bed Fusion of Metals (PBF-LB/M), the quality of the final product is significantly influenced by the thermal behaviour of the melt pool. Accurate temperature measurements are challenging due to high temperature gradients and rapid cooling. This study introduces Multispectral Imaging (MSI) as a highly effective thermometry technique to address these demanding conditions. MSI captures multiple bands of radiation, enabling the simultaneous determination of absolute temperature and surface emissivity. This capability is crucial for ensuring high-quality outcomes in laser–metal processing such as PBF-LB/M, contingent upon robust radiometric calibration . To enhance reliability, two radiometric calibration models were developed: an empirical model based on linear sensor data correlations and an analytical model leveraging sensor behaviour. An efficient calibration was found for both models across a range of signal-to-noise ratios in the black body calibrator, where the analytical model even performs robust under a high noise level . Additionally, the temperature accuracy in the solid-state case was tested with a thermo-mechanical simulator. Results showed that the empirical and analytical models achieved mean relative errors of 2.0% and 1.6%, respectively, outperforming the state-of-the-art. Further, laser irradiation experiments highlighted the analytical model’s ability to accurately determine the emissivity decrease during the solid-to-liquid transition, allowing for accurate melt pool temperature estimations. Conversely, the empirical model struggled to estimate temperature effectively in the liquid phase . This study not only proposed a robust methodology of MSI in temperature measurement but also confirmed the accuracy and reliability of the system, broadening the scope for further investigation into the intricate thermal dynamics involved in laser–metal interactions.