Facile Fabrication of Superwetting PVDF Membrane for Highly Efficient Oil/Water Separation

A novel superhydrophilic and underwater superoleophobic modified PVDF membrane for oil/water separation was fabricated through a modified blending approach. Pluronic F127 and amphiphilic copolymer P (MMA-AA) were directly blended with PVDF as a hydrophilic polymeric additive to prepare membranes via phase inversion induced by immersion precipitation. Then, the as-prepared microfiltration membranes were annealed at 160 °C for a short time and quenched to room temperature. The resultant membranes exhibited contact angles of hexane larger than 150° no matter whether in an acidic or basic environment. For 1, 2-dichloroethane droplets, the membrane surface showed a change from superoleophilic to superoleophobic under water with aqueous solutions with pH values from 2 to 13. This as-prepared membrane has good mechanical strength and can then be applied for oil and water mixture separation.