Static Characteristics and Leakage Rates of Smooth Annular Seals Based on a New Solution Method for Gas-Liquid Two-Phase Conditions

This paper proposes a new solution method for the leakage and static characteristics of smooth annular seal under a homogeneous gas-liquid two-phase flow based on a bulk-flow model. In this solution method, the Rayleigh–Plesset equation is introduced into the governing equations to describe the behavior of bubbles considering mixture compressibility. Detailed comparisons between Childs’ experimental leakage rates and predicted ones based on the proposed method are conducted, and the predicted results show good agreement with the experimental results, with a maximum error of 11.2%. Moreover, static characteristics of the seal, including leakage rates, gas volume fraction (GVF) distribution, pressure distribution, mixture density, and viscosity within the seals, are investigated based on the present method. The results show that as the inlet gas volume fraction increases from 0% to 10%, the local gas volume fraction of each axial position will increase, however, the seal leakage, mixture density, and mixture viscosity will decrease. Bubble radius has little effect on the leakage rates and the static characteristics of the seals. Additionally, comparisons between the characteristics of the model seals with different clearances show that the leakages of the seals with bigger clearance behave more sensitively to the inlet GVF changes.