离子液体
稀释剂
化学
钋
萃取(化学)
水溶液
无机化学
剥离(纤维)
碳酸铵
煤油
溶剂
钼
核化学
有机化学
材料科学
催化作用
复合材料
作者
Esteban Quijada‐Maldonado,F. Farcia Sanchez,Bárbara Pérez,Ricardo A. Tapia,Julio Romero
标识
DOI:10.1021/acs.iecr.7b04147
摘要
In this work, the recovery of molybdenum(VI) (Mo) from aqueous solutions was carried out by solvent extraction (SX) using ammonium and phosphonium-based task-specific ionic liquids (TSILs) as extractants diluted in kerosene and two other hydrophobic room-temperature ionic liquids (RTILs). Four different TSILs were used as extractants: trioctylmethylammonium bis(2-ethylhexyl) phosphate [TOMA][D2EHP]; trioctylmethylammonium benzoate [TOMA][BA]; trihexyltetradecylphosphonium bis(2-ethylhexyl) phosphate [P 6,6,6,14 ][D2EHP]; and trihexyltetradecylphosphonium benzoate [P 6,6,6,14 ][BA]. These TSILs were synthesized to assess the effect of the cation and anion on the SX of Mo(VI). Experimental results indicated that high extraction percentages of Mo(VI) were obtained with all the synthesized TSILs. Besides that, the best cation was [TOMA] + for all the diluents and [BA] − was the best anion when kerosene and 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [omim][Tf 2 N], were the diluents. Furthermore, the SX process using these ionic liquids followed an anion-exchange mechanism for kerosene and [omim][Tf 2 N] as diluents. Finally, the stripping was successfully performed with a solution of ammonium carbonate, and the extent of stripping depended on the selected diluent.
科研通智能强力驱动
Strongly Powered by AbleSci AI