Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses

This paper addresses the development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses are investigated. The modified Andreasen & Andersen particle packing model is utilized to achieve a densely compacted cementitious matrix. Fly ash (FA), ground granulated blast-furnace slag (GGBS) and limestone powder (LP) are used to replace cement, and their effects on the properties of the designed UHPC are analyzed. The results show that the influence of FA, GGBS or LP on the early hydration kinetics of the UHPC is very similar during the initial five days, while the hydration rate of the blends with GGBS is mostly accelerated afterwards. Moreover, the mechanical properties of the mixture with GGBS are superior, compared to that with FA or LP at both 28 and 91 days. Due to the very low water amount and relatively large superplasticizer dosage in UHPC, the pozzolanic reaction of FA is significantly retarded. Additionally, the calculations of the embedded CO2 emission demonstrate that the cement and mineral admixtures are efficiently used in the developed UHPC, which reduce its environmental impact compared to other UHPCs found in the literature.