腐蚀
微观结构
材料科学
合金
沉浸式(数学)
冶金
多孔性
熔盐
电化学
融合
金属
复合材料
电极
化学
语言学
物理化学
纯数学
数学
哲学
作者
Juan Ignacio Ahuir‐Torres,Gregory J. Gibbons,Geoff West,A. Das,Hiren R. Kotadia
标识
DOI:10.1016/j.jallcom.2023.172300
摘要
Metal additive manufacturing (AM) is an emerging disruptive technology capable of manufacturing complex shaped components that are difficult to manufacture through conventional methods. However, the corrosion behaviour of AM fabricated parts must be considered for safety critical applications. For this reason, we have studied the relationship between AM fabricated Scalmalloy (Al-Mg-Sc-Zr) microstructures and their corresponding corrosion behaviours. This comparison has been drawn against a comparable commercial Al-Mg alloy (5182). The corrosion resistance of the samples in salt water was assessed via various electrochemical analytics techniques. It was observed that Scalmalloy produced better corrosion resistance than 5182 Al-alloy. This can be attributed to the spontaneous formation of a passive film on refined AM microstructure and the presence of Sc and Zr, specifically when samples were fabricated with higher density (less porosity). The alloys’ corrosion mechanisms were dependent on immersion time and the microstructural features of the samples.
科研通智能强力驱动
Strongly Powered by AbleSci AI