Stab resistance of flexible composite reinforced with warp-knitted fabric like scale structure at quasi-static loading

The stab-resistant fabric like scale structure has a promising application prospect for areas of stab prevention owing to its great flexibility and excellent stab-resistance performance. In this paper, a kind of novel stab-resistant fabric has been designed by coating with epoxy resin (ER) and silicon carbide (SiC) particles, which was based on the warp-knitted fabric like scale structure (WKFS). The uniformity of dispersion has been investigated with different diameter and mass fraction of SiC, and polymerization degree of polyglycols (PEG); the flexibility and quasi-static properties of different kinds of WKFS treated with different coating solution has been studied, and the coating solution was prepared by mixing SiC particles and ER at different ratios. The results showed that the dispersion uniformity of the dispersion was the best when the diameter of SiC is 1 μm, the content is 50%, and the polymerization degree of PEG is 600. The longitudinal flexibility of the stab-resistant fabric is greater than that of transverse due to the gap between the longitudinal scales, and the addition of SiC particles can increase the transverse and longitudinal flexibility of stab-resistant fabric, and the flexible properties were the greatest when SiC:ER = 50:30. In addition, the WKFS treated with SiC of 16.7% has fatigue resistance; the damage mechanism of the fabric treated with pure ER is thankful to the brittleness of the resin; the added SiC particles hinder the further crack propagation of the resin, and the failure mode is mainly in stretch.