Comparison of downstream processing methods in purification of highly active laccase

Laccases have received the attention of researchers in the last few decades due to their ability to degrade phenolic and lignin-related compounds. This study aimed at obtaining the highest possible laccase activity and evaluating the methods of its purification. The crude laccase from bioreactor cultivation of Cerrena unicolor fungus was purified using ultrafiltration, aqueous two-phase extraction (ATPE) and foam fractionation (FF), which allowed for the assessment of these three downstream processing (DSP) methods. The repeated fed-batch cultivation mode applied for the enzyme production resulted in a high laccase specific activity in fermentation broth of 204.1 U/mg. The use of a specially constructed spin filter inside the bioreactor enabled the integration of enzyme biosynthesis and biomass filtration in one apparatus. Other methods of laccase concentration and purification, namely ATPE and FF, proved to be useful for laccase separation; however, the efficiency of FF was rather low (recovery yield of 24.9% and purification fold of 1.4). Surprisingly, the recovery yield after ATPE in a PEG 6000-phosphate system in salt phase was higher (97.4%) than after two-step ultrafiltration (73.7%). Furthermore, it was demonstrated that a simple, two-step purification procedure resulted in separation of two laccase isoforms with specific activity of 2349 and 3374 U/mg. All in all, a compact integrated system for the production, concentration and separation of fungal laccases was proposed.