Hierarchical elastic and conductive multiwall carbon nanotubes carboxymethylcellulose silica hybrid aerogel for strain sensor

Abstract Flexible and wearable piezoelectric pressure sensors have attracted extensive interest for their potential applications in human health monitoring. However, it remains a challenge to fabricate exceedingly elastic, conductive and steady strain-sensitive aerogels. Herein, an elastic and conductive carboxymethylcellulose sodium/methyltrimethoxysilane/multiwall carbon nanotube (CMC/MTMS/MWCNT) aerogel with interconnected porous microstructure was fabricated by a solution mixing and freeze-drying technique. Owing to covalent, ionic and hydrogen-bonding interactions between flexible CMC chains, MTMS and MWCNTs, the as-prepared CMC/MTMS/MWCNT hydrophobic aerogel with 50 wt% MWCNT loading exhibits good elasticity (1500 steady compression cycles at 30% strain), a broad pressure detection range (0–150 kPa) and reasonable compression sensitivity with gauge factor of 1.02 under 20%–30% strain. Additionally, the CMC/MTMS/MWCNT aerogel was used as a strain sensor and successfully demonstrated human motion detection—not only large-scale actions (finger bending) but also small-scale muscle movements (swallowing). With these results, our CMC/MTMS-50 aerogel is a promising candidate for utilization in flexible and wearable strain sensors.