The investigation of the mechanical thermal and physical properties of using waste toner/MCC/old newspaper fiber in polypropylene hybrid composites

Abstract In this study, the effects of polypropylene (PP) composites produced by adding 10% old newspaper fibers (ONP), 5% microcrystalline cellulose (MCC), 3% polypropylene carbonate (PPC), and waste toner from 1% to 4% on the mechanical properties, physical properties, morphological, and thermal properties were investigated. According to the FTIR‐ATR and SEM‐EDS analysis results, it was determined that a significant part of the waste toner used in the study consisted of polystyrene co‐acrylate, and the remaining part consisted of carbon black and trace amounts of silicate. In the research, it was determined that the flexural and tensile strengths of MCC/ONP/PP composites containing 1% waste toner and 3% PPC increased by 13% and 46%, respectively, compared to the control sample. Additionally, the samples with the lowest water absorption values were measured in composites containing 1% waste toner and 3% PPC. The highest crystallinity value (50.75%) was obtained with the use of 1% waste toner and 3% PPC in MCC/ONP/PP composites. However, with waste toner usage above 1%, the mechanical, thermal properties, and water absorption rate have slightly decreased. As a result of the study, it was concluded that up to 1% waste toner with 3% PPC can be used successfully in MCC/ONP/PP composites.