抛光
碳化硅
材料科学
基质(水族馆)
表面粗糙度
模具(集成电路)
研磨
化学机械平面化
表面光洁度
半径
半导体
半导体器件制造
机械工程
光电子学
复合材料
计算机科学
纳米技术
工程类
薄脆饼
地质学
海洋学
计算机安全
作者
Peng Zhang,Jingfang Yang,Huadong Qiu
标识
DOI:10.1007/s00170-021-08186-w
摘要
Silicon carbide (SiC) has been a promising the third-generation semiconductor power device material for high-power, high-temperature, and substrate applications. However, under certain surface quality requirement, its current processing efficiency is the bottleneck. Therefore, it aims to improve the material removal rate (MRR), on the premise of ensuring the surface roughness requirements. To obtain the relationship between any point on SiC substrate and polishing pads, the model about double-faced mechanical polishing has been established, and the kinematics equations have been created. Best optimized material removal rate parameters were obtained. MRR reached the maximum when speed rate of the outside ring gear to the inside sun gear m = − 1, speed rate of lower plate to the inside sun gear n = 5, and SiC substrate distribution radius RB = 75. The primary and secondary order of MRR (n>m>RB) was obtained. An accurate mathematical model of orthogonal rotary regression test of Tri-factor quadratic of MRR was established, and the regression model was significant. Surface quality of SiC substrate was observed and characterized with SEM and AFM. It greatly provides a key guarantee for the next process of CMP, confirms the importance of MRR to ultra-smooth polishing, and provides a guarantee for its application in semiconductor equipment and technology.
科研通智能强力驱动
Strongly Powered by AbleSci AI