烟气脱硫
催化作用
钼酸盐
化学
硫黄
钼
碳氢化合物
无机化学
铜
吸附
氧气
环境友好型
加氢脱硫
二氧化硫
氮氧化物
烟气
多相催化
化学工程
氧化还原
铬
相(物质)
有机化学
作者
Ekaterina A. Eseva,Sofya Sh. Latypova,Aleksey S. Pitirimov,Oleg I. Kirilov,Ivan S. Levin,Oleg Yu. Grafov,Alexander V. Anisimov
标识
DOI:10.1021/acs.energyfuels.6c04704
摘要
Abstract This work presents a new environmentally friendly copper molybdate-based catalyst, synthesized using various methods, for the aerobic oxidative desulfurization (AODS) of hydrocarbon fuels. The influence of the synthesis method (coprecipitation, hydrothermal, and solid-phase) on the phase composition, structural characteristics, and catalytic activity of the samples was studied. High sulfur resistance was observed for catalysts containing the Cu3Mo2O9 phase, enabling the efficient oxidation of sulfur-containing compounds at extremely high sulfur concentrations of 4000 ppm. This stability is due to the synergy of copper and molybdenum centers, structural defects, and an increased proportion of adsorbed oxygen species, which facilitates the efficient activation of O2 and the generation of superoxide radicals. The CuMo-P catalyst demonstrated the highest oxidation efficiency, providing 100% DBT conversion at 150 °C for 2 h and 83% in 3 h in model fuels with total sulfur contents of 2000 and 4000 ppm, respectively. The CuMo-P catalyst is stable and maintains high activity for at least seven cycles without structural changes and is characterized by high selectivity, minimizing hydrocarbon matrix oxidation. This study has significant implications for the development of molybdate catalysts for various industrially important oxidation processes and confirms the potential of CuMo-P for deep desulfurization of high-sulfur petroleum fractions.
科研通智能强力驱动
Strongly Powered by AbleSci AI