Multi-Objective Optimization and Validation of a Diodic Profile
计算机科学
作者
Avidh S. Bavkar,Guillermo Paniagua,Peter Salek,Venkat Athmanathan,Terrence R. Meyer,Christopher A. Fugger,Hugh D. Perkins,James Braun
出处
期刊: [American Institute of Aeronautics and Astronautics] 日期:2024-01-04被引量:1
标识
DOI:10.2514/6.2024-1036
摘要
The present paper investigates the flow physics of Tesla valves and studies how various geometric parameters affect their performance. The performance of the valve is measured by its diodicity, evaluated by comparing pressure drops and discharge coefficients in the forward and reverse flow directions. First, only the flow return angle of a baseline geometry was varied to understand the impact of return angle on valve performance. These baseline geometries are first analyzed with CFD, and then fabricated and installed in a steady-state experimental test rig equipped with pressure transducers, to measure forward and reverse discharge coefficients. Seven additional geometries are also tested in cold flow to identify the impact of diode count, diode volume, and orifice size on valve performance. Next, a multi-objective optimizer is allowed to vary 12 geometric parameters to produce an optimum geometry.