微电子机械系统
材料科学
模具
造型(装饰)
图层(电子)
电阻温度计
复合材料
纳米-
聚合物
光电子学
纳米技术
温度测量
量子力学
物理
作者
Youngmin Kim,Yong Choi,Young-Joo Kim,Shinill Kang
摘要
It is a very critical process to control the temperature of stamper surface in the micro/nano molding. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer greatly deteriorates the transcribability and fluidity of polymer melt. To improve the transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, an injection mold was prepared with microelectromechanical systems (MEMS) resistance temperature detector (RTD) sensor and MEMS heater to increase the stamper surface temperature over the glass transition temperature during the filling stage. We could control the stamper surface temperature up to 100°C within a few seconds using the fabricated MEMS heater. Finally, the high density optical disc substrates were replicated using the injection mold with MEMS heater and MEMS sensor.
科研通智能强力驱动
Strongly Powered by AbleSci AI