电池(电)
过电位
电容
材料科学
假电容
阴极
功率密度
塔菲尔方程
化学工程
电流密度
超级电容器
水溶液
析氧
电化学
化学
电极
功率(物理)
热力学
有机化学
物理化学
物理
工程类
量子力学
作者
Dandan Xu,Shijie Wu,Xinxin Xu,Qiang Wang
标识
DOI:10.1021/acssuschemeng.9b06715
摘要
To achieve high power/energy density and capacitance/voltage in a safe and cost-effective battery system, a hybrid aqueous Zn battery is assembled by kneading Zn–air and Zn–Co 3 O 4 batteries at the cell level. A new coordination-polymer-derived, oxygen-vacancy-rich Co 3 O 4 -based composite is chosen as a cathode material for this hybrid battery. The pseudocapacitance property of this composite is attractive with a specific capacitance of 213.7 mAh·g –1 at 1 A·g –1 . Its rate capability is promising with 62.6% capacitance retained when the current density increases to 20 A·g –1 . The composite follows a typical four-electron mechanism during the oxygen reduction reaction (ORR). In the oxygen evolution reaction (OER), its overpotential and Tafel slope are 347 mV and 79.4 mV·dec –1, respectively. For the hybrid aqueous Zn battery, the discharge process is divided into two stages, namely, a Zn–Co 3 O 4 battery and a Zn–air part. With the current density at 1 mA·cm –2, two discharge plateaus locate at 1.72 and 1.02 V. In this case, the specific capacitance of the hybrid battery reaches 788 mAh·g –1 with an energy density of 921 Wh·kg –1 . Its peak power density reaches 48.9 mW·cm –2 at 34.8 mA·cm –2 . The charge–discharge platforms and specific capacitance remain stable after continuous experiments for 300 cycles. This work introduces a referable example for the design and fabrication of a high-performance hybrid aqueous Zn battery.
科研通智能强力驱动
Strongly Powered by AbleSci AI