Landslide Hazard Assessment Method Considering the Deformation Factor: A Case Study of Zhouqu, Gansu Province, Northwest China

Landslides are geological disasters that can cause great damage to natural and social environments. Landslide hazard assessments are crucial for disaster prevention and mitigation. Conventional regional landslide hazard assessment results are static and do not take into account the dynamic changes in landslides; thus, areas with landslides that have been treated and stabilized are often still identified as high-risk areas. Therefore, a new hazard assessment method is proposed in this paper that combines the deformation rate results obtained by interferometric synthetic aperture radar (InSAR) with the results of conventional hazard assessments to obtain the hazard assessment level while considering the deformation factor of the study area, with Zhouqu, Gansu Province, selected as the case study. First, to obtain the latest landslide inventory map of Zhouqu, the hazard assessment results of the study area were obtained based on a neural network and statistical analysis, and an innovative combination of the deformation rate results of the steepest slope direction from the ascending and descending data were obtained by InSAR technology. Finally, the hazard assessment level considering the deformation factor of Zhouqu was obtained. The method proposed in this paper allows for a near-term hazard assessment of the study area, which in turn enables dynamic regional landslide hazard assessments and improves the efficiency of authorities when conducting high-risk-area identification and management.