Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters

In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obtained by the control of processing parameters, such as solvent type, solids concentration, particle size, freezing rate, and types of additives. The varied morphologies permit the application of freeze-casted materials in various technological applications. However, despite the high amount of studies about freeze-casting of ceramic materials in the last years, review articles addressing the influence of processing parameters on the pore characteristics of obtained ceramics are still scanty. Therefore, this review addresses the influence of freeze-casting process parameters on the pore characteristics of the ceramic materials.