Investigation of key morphological parameters of pores in different grades of asphalt mixture based on CT scanning technology

The internal pore structure of asphalt mixtures directly influences their permeability characteristics. Current research has not yet clarified the quantitative characterization of different types of meso-pore structures and their impact mechanisms on permeability characteristics. Therefore, this study, based on the acquisition of the internal pore structure of asphalt mixtures through CT non-destructive scanning technology, classifies pores according to their characteristics. It conducts a multi-dimensional and multi-scale qualitative and quantitative analysis of the meso-pore structures of asphalt mixtures in terms of pore distribution, equivalent radius of pore throats, inclination angle of pore throats, tortuosity of pore throats, and pore connectivity. The results indicate that the internal pore distributions of AC-16, SMA-16, OGFC-13, and OGFC-16 gradation asphalt mixtures are uniform, without noticeable segregation. The results of porosity obtained through non-destructive CT scanning technology demonstrate good consistency with those of macroscopic experiments. This demonstrates that analyzing CT images can accurately acquire pores and quantify pore characteristics. The number of pores in AC-16 gradation specimens is approximately 3–5 times that of other groups of gradation specimens, but the average volume of the pores is only 0.98 mm3. The average pore volume for SMA-16 gradation is 5.1 mm3, while for OGFC-13 and OGFC-16 gradation, the average pore volumes are 28.3 mm3 and 29.6 mm3, respectively. In SMA-16 grade specimens, the volume of open pores accounts for 95% of the total pore volume, despite the fact that open pores make up only 1% of the total number of pores. In the OGFC-13 and OGFC-16 graded asphalt mixtures, the volumes of interconnected pores account for 88.7% and 88.9% of the total pore volume, respectively. The number and volume proportion of pore throats decrease with the increase in pore throats angle, indicating that there are more pore throats with smaller angles, which are conducive to longitudinal drainage, and fewer pore throats with larger angles, which are conducive to lateral drainage. This suggests that the vertical permeability of samples formed by traditional Marshall compaction is usually greater than their horizontal permeability.