催化作用
化学
铜
苯酚
氧化铈
动力学
无机化学
金属
铈
氧化物
氧化铜
分压
化学动力学
氧气
反应速率常数
湿式氧化
反应速率
反应级数
核化学
有机化学
量子力学
物理
作者
WANJia-feng,FENGYu-jie,CAIWei-min,YANGShao-xia,SUNXiao-jun
出处
期刊:环境科学学报:英文版
日期:2004-01-01
卷期号:16 (4): 556-558
摘要
Four metal oxide catalysts composed of copper (Cu), stannum (Sn), copper-stannum (Cu-Sn) and copper-cerium(Cu-Ce) respectively were prepared by the co-impregnation method, and γ-alumina(γ-Al2O3) is selected as support. A first-order kinetics model was established to study the catalytic wet air oxidation of phenol at different temperature when these catalysts were used. The model simulations are good agreement with present experimental data. Results showed that the reaction rate constants can be significantly increased when catalysts were used, and the catalyst of 6% Cu-10%Ce/γ-Al2O3 showed the best catalytic activity. This is consistent with the result of catalytic wet air oxidation of phenol and the COD removal can be arrived at 98.2% at temperature 210℃, oxygen partial pressure 3 MPa and reaction time 30 min. The activation energies of each reaction with different catalysts are nearly equal, which is found to be about 42 kJ/mol and the reaction in this study is proved to be kinetics control.
科研通智能强力驱动
Strongly Powered by AbleSci AI