产量(工程)
岩土工程
链条(单位)
材料科学
地质学
腐蚀
抗剪强度(土壤)
结构工程
工程类
环境科学
计算机科学
土-结构相互作用
数学
工作(物理)
组分(热力学)
土壤水分
法律工程学
刚度
作者
Wenlong Liu,Yinghui Tian,Mark Jason Cassidy,Phil Watson,Conleth O’Loughlin
出处
期刊:Journal of Geotechnical and Geoenvironmental Engineering
[American Society of Civil Engineers]
日期:2026-06-06
卷期号:152 (8)
标识
DOI:10.1061/jggefk.gteng-14118
摘要
This paper establishes a soil resistance yield surface for chain links embedded in clay using three-dimensional finite element analysis that considers realistic chain geometries and the effect of embedment depth. The derived yield surface and its associated flow rule are used to develop a new analytical solution for evaluating embedded chain behavior. Unlike existing approaches that decouple axial and normal resistances to embedded chains by assuming a constant friction coefficient, the proposed solution captures the interaction between three-dimensional soil resistance components through the yield surface formulation. The new solution is validated against published experimental data and further compared with existing approaches. A calculation example is presented to demonstrate the evolution of chain configuration, and the results show that the mobilized (or equivalent) friction coefficient—the ratio of the axial to the normal resistance—varies significantly due to the depth-dependent interaction of these two components. By accounting for the coupling of soil resistance components, the proposed solution offers a practical yet readily implementable approach for chain geotechnical design and analysis.
科研通智能强力驱动
Strongly Powered by AbleSci AI