电致发光
量子点
光电子学
转印
材料科学
像素
二极管
电致发光显示器
发光二极管
背板
有机发光二极管
亮度
量子点激光器
晶体管
RGB颜色模型
灵活的显示器
显示设备
半导体
量子效率
阈值电压
有机半导体
电压
传输(计算)
光学
量子阱
过程(计算)
全息术
薄膜晶体管
作者
Jeong‐Wan Jo,Yoonwoo Kim,Sanghyo Lee,Jiajie Yang,Yaron Bernstein,Giovanni Francesco Cotella,Feng Zhao,Quan Lyu,Thomas E. Davies,Faris Abualnaja,Greg Chu,Hannah Jane Joyce,Stephan Hofmann,Jack Alexander-Webber,Bo Hou,Sung‐Min Jung,Gehan A. J. Amaratunga,Jong Min Kim
标识
DOI:10.1038/s41928-026-01670-9
摘要
Inorganic colloidal quantum dot light-emitting diodes could be used to build next-generation electroluminescent displays due to their colour properties and electrical stability. However, to create high-resolution and large-area displays, a pixel integration method is required, which can deposit quantum dot arrays on an active-matrix backplane and maintain uniformity and precision, without colour cross-contamination. Here we report a cracking-assisted transfer printing technology that can be used to pattern high-resolution full-colour pixel arrays over large areas. The technology uses a controlled cracking process to fracture interparticle cohesive bonds between quantum dots. This facilitates subsequent pick-up and transfer to a thin-film transistor backplane with high precision. With the technology, we achieve pixels down to a size of 600 nm with electroluminescent emission and uniform pixelization over areas up to 4 inches. We create a cadmium-free full-colour active-matrix display with a resolution of 341 pixels per inch, as well as a blue active-matrix display with a flexible form factor. Furthermore, the cracking-assisted transfer printing can improve electroluminescence performance-with higher maximum luminance and operational lifetime than other quantum dot patterning techniques-through precise nano-interface control and high quantum dot packing density.
科研通智能强力驱动
Strongly Powered by AbleSci AI