作者
Wujiu Pan,Y Li,Yongzheng Ma,Wenhao Yuan,Ziwei Zhou,Xiaoman Nan
摘要
Bolted connections are widely used in engineering systems, where reliability depends on preload distribution. This study proposes a unified framework for multi-bolt connection stiffness. A single-bolt stiffness model is first developed, decomposing stiffness into bolt, component, and interface contributions. A spring-node equivalent model is then established to incorporate elastic interactions, leading to prediction models for single-bolt single-step, multi-step, and simultaneous multi-bolt tightening. Finite element and ultrasonic results show strong agreement, with errors below 1.0%. Parametric analysis reveals that bolt spacing and component stiffness dominate preload redistribution, while tightening strategy affects preload uniformity, providing guidance for design and assembly optimization.Bolted connections are extensively employed in aircraft engines, energy systems, and large-scale machinery, where reliability is largely governed by the magnitude and distribution of bolt preload. To overcome the limitations of existing studies that treat single-bolt stiffness modeling and multi-bolt elastic interactions separately, this study proposes a unified framework for predicting the stiffness of multi-bolt connections. First, a single-bolt connection stiffness model is developed, systematically decomposing the overall stiffness into bolt axial stiffness, component stiffness, and multi-scale interface stiffness. Second, a spring-node equivalent model is constructed. Based on this, interactive connection stiffness is introduced to develop three prediction models: a single-bolt single-step model, a single-bolt multi-step model, and a general residual preload prediction model for simultaneous multi-bolt tightening. Finite element simulations and ultrasonic experiments demonstrate strong agreement between theoretical predictions and experimental results, with a maximum relative error below 1.0%. Further analysis investigates the influence of preloading methods, bolt spacing, component thickness, and material parameters on elastic interactions. The results indicate that bolt spacing and component stiffness play dominant roles in preload redistribution behavior, while the tightening strategy significantly affects the uniformity of residual preload. These findings provide quantitative guidance for the selection of bolt layout parameters, the optimization of tightening sequences, and the reliability-oriented design of bolted joint systems.