Analysis of the No-Flow Criterion Based on Accurate Crystallization Data for the Simulation of Injection Molding of Semi-Crystalline Thermoplastics

Abstract It is well known in practice that the shape and dimensions of injected parts are highly dependent on the packing-holding stage. A major problem in semi-crystalline polymers is the prediction of the solidified layer, whose thickness has an important effect on shrinkage and warpage. We propose a pragmatic approach based on the concept of no-flow temperature. This temperature should be related to crystallization temperature, but the choice is not easy because it depends on cooling rate and pressure which are functions of time and position. The objective of the work is to evaluate the sensitivity of an injection molding computation to the no-flow temperature and to evaluate the relevance of its choice. The crystallization temperature of an isotactic polypropylene is determined as a function of cooling rate and pressure in laboratory experiments. The pressure dependence is measured using the original Cristapress cell. As a case study, we simulate the filling and post-filling of a plate mold using Rem3D, a 3D code for injection molding. Three no-flow temperatures and two sets of parameters for temperature dependence of viscosity are tested. Their respective influences on the pressure evolution are shown, and the crystallization temperature calculated a posteriori using the experimental material data is compared to the “arbitrary” no-flow temperature.