下部结构
理论(学习稳定性)
弯曲
结构工程
过程(计算)
模态分析
工程类
动载试验
情态动词
机械工程
计算机科学
材料科学
有限元法
操作系统
机器学习
高分子化学
作者
Xue-Bin Dang,Min Wan,Weihong Zhang,Yun Seok Yang
标识
DOI:10.1016/j.ymssp.2021.108311
摘要
Existing studies on analyzing the chatter problem in the milling process of the thin floors only included the dynamic responses of the cutter and the thin floors, however, the static lateral bending defections of the cutter also have actual effect on the stability of the process. This article develops a dynamic model to study the stability of the thin floor milling process by comprehensively considering the multi-flexibilities from both the static bending defections and the dynamic responses. The instantaneous dynamic chip thickness, which is required in the dynamic model, is analytically derived in the three-dimensional space by fully considering the following two factors. One is the bending effect induced by the static and dynamic deflections of the cutter in the X- and Y-directions, and the other is the tensing-compressing effect originated from the dynamic defections of the cutter and the workpiece in the Z-direction. At the same time, based on the substructure and sensitivity analysis theories, the in-situ dynamic parameters of the in-process floor, i.e. the natural frequency and the modal shape, are theoretically formulated by well combining the change of the cutter position with the removal of material. Based on the above derivations, the dynamic cutting forces together with the dynamic governing equation of the milling system are mathematically formulated, and then, the stability of the thin floor milling process is analyzed through solving the critical stability boundary. Finally, a series of milling tests are conducted on a typical thin floor structure to experimentally validate the accuracy and reliability of the proposed model.
科研通智能强力驱动
Strongly Powered by AbleSci AI