材料科学
扫描电子显微镜
电镀
锡
电流密度
粒度
四方晶系
冶金
形态学(生物学)
多孔性
电镀(地质)
涂层
衍射
化学工程
晶体结构
复合材料
结晶学
化学
图层(电子)
工程类
地质学
物理
光学
生物
量子力学
遗传学
地球物理学
作者
Ashutosh Sharma,Yoo-Na Jang,Jae Pil Jung
标识
DOI:10.1179/1743294414y.0000000427
摘要
In this work, tin electroplating from acidic sulphate bath containing stannous sulphate, sulphuric acid and a glycol type additive with a leveller has been studied on steel substrates. The effects of plating current density on microstructural and morphological features are investigated. The structural and morphological characteristics have been studied by X-ray diffraction (XRD), and scanning electron microscopy (SEM). The XRD analysis confirms that the coatings produced by sulphate bath consist of tetragonal (β-Sn) crystal structure. The grain size of the deposits decreases up to a critical current density (∼30 mA cm −2 ), and then an increase in grain size is noticed. The coating morphology turns irregular and porous at higher current densities (about 40–50 mA cm −2 ) due to the rapid increase in hydrogen evolution as depicted from the secondary electron SEM images. Line profile analysis across the cross-section of the coatings further confirms the absence of any constituent coming from the bath additives.
科研通智能强力驱动
Strongly Powered by AbleSci AI