材料科学
级配
钻石
最小曲面
变形(气象学)
复合材料
表面能
波纹度
工作(物理)
阴极射线
机械能
融合
格子(音乐)
金刚石立方
压缩(物理)
数字图像相关
屈曲
曲面(拓扑)
几何学
金刚石车削
材料性能
均质化(气候)
变形机理
能量法
刚度
晶格常数
作者
Giovanni Rizza,Danilo Bruson,Manuela Galati,Luca Iuliano
标识
DOI:10.1002/adem.202502812
摘要
Among the different lattice structures, the one based on triply periodic minimal surface (TPMS) is characterized by the absence of sharp angles, which guarantees superior mechanical properties if compared to beam‐based structures. The mechanical response of these structures depends on the geometry of the guiding surface and the wall thickness, which is typically considered constant throughout the structure. On the contrary, this work investigates the modulation of the mechanical response of the diamond TPMS structure through the graduation of the wall thickness, with four different patterns: vertical, diagonal, cross, and core. For each of these structures, samples are produced with the powder bed fusion with electron beam additive manufacturing technique. Morphological characteristics of the structures are measured using X‐ray computed tomography. These data are then correlated to the mechanical properties obtained from compression tests and the deformation behavior obtained from digital image correlation analyses. The results show that 3D wall thickness gradation can be successfully adopted to modulate the mechanical and deformation behavior of the structures. Moreover, structures with a graded wall thickness provide improved energy absorption capabilities and show the possibility to tune energy absorption as a function of the adopted gradation pattern and thickness.
科研通智能强力驱动
Strongly Powered by AbleSci AI