Highly Efficient Organic Dyes Capture Using Thiol-Functionalized Porous Organic Polymer

It is of great significance to develop new materials for efficient capture cationic dyes methylene blue (MB) and malachite green (MG). In this work, a novel triptycene-based porous organic polymer with abundant thiol groups (TPP-SH) was prepared successfully by postmodification with a high surface area and robust triptycene-based porous organic polymer (TPP). The obtained TPP-SH exhibited a high surface area, good porosity, and good thermal stability. In addition, TPP-SH was highly effective at capturing MB and MG from aqueous solution because of the abundant thiols in its hierarchical structure. Under optimal adsorption conditions, the maximum adsorption capacities of MB and MG calculated by the Langmuir model at room temperature were 1146.3 and 689.6 mg g^-1, respectively. These values are higher than those of many reported materials. The MB and MG adsorption rates were 0.0154 and 6.69 × 10^-4 mg g^-1 min^-1, respectively. Furthermore, the polymer TPP-SH had a good recycling performance after adsorption-desorption at least five times. Therefore, the TPP-SH exhibited a high adsorption capacity, fast adsorption kinetics, and easy-recycling behavior, providing a new avenue for the preparation of green functionalized adsorbents with good performance for water decontamination.