材料科学
制作
烧结
闪光灯(摄影)
陶瓷
冶金
复合材料
光学
医学
替代医学
物理
病理
作者
Junbo Xia,Wei Ren,Hao Sun,Bo Zhang
标识
DOI:10.1016/j.ceramint.2024.02.091
摘要
Mn–Co–Ni–O ceramics are promising negative temperature coefficient (NTC) thermistor materials. However, the high sintering temperatures and long sintering time of Mn–Co–Ni–O ceramics are not favorable to grain size control which is closely related to the electric properties of the ceramics. In this work, Mn1.5Co1.2Ni0.3O4 (MCN) ceramics were prepared via reactive flash sintering (RFS) of a mixture of Mn3O4, Co2O3 and NiO powders at the current density of 0.2–1.6 A·mm−2, sintering time of 30–120 s and sintering temperature of 300 °C (far below the conventional sintering temperature of 1450 °C). The average grain size of the fabricated ceramics was 1.71–3.77 μm, being much smaller than that achieved via conventional sintering (10–12 μm). As a result, the room-temperature resistivity of the ceramics (3.6–25.5 kΩ·cm) exceeded that reported in other study (1.7 kΩ·cm), and B values (2958–4075 K) were in comparable to that reported in literature (3676 K). Moreover, the enhanced grain boundary diffusion was considered as the predominant mechanism for the RFSing of MCN ceramics.
科研通智能强力驱动
Strongly Powered by AbleSci AI