焊接
材料科学
复合材料
热塑性塑料
超声波焊接
超声波传感器
复合数
冷焊
电阻焊
热影响区
气体保护金属极电弧焊
物理
声学
作者
B.C.P. Jongbloed,Julie Teuwen,Geneviève Palardy,Irene Fernández Villegas,Rinze Benedictus
标识
DOI:10.1177/0021998319890405
摘要
Continuous ultrasonic welding is a high-speed joining method for thermoplastic composites. Currently, a thin film energy director is used to focus the heat generation at the interface. However, areas of intact energy director remain in the welded seam, which significantly lowers the weld strength, and result in a non-uniformly welded seam. To improve the weld uniformity of continuous ultrasonically welded joints, we changed to a more compliant energy director. A woven polymer mesh energy director was found to give a significant improvement in weld quality. The mesh was flattened in between the composite adherends during the welding process. This flattening promoted a good contact between the energy director and the adherends, fully wetting the adherend surfaces, resulting in a more uniformly welded seam without areas of intact energy director.
科研通智能强力驱动
Strongly Powered by AbleSci AI