光伏系统
需求响应
峰值需求
储能
电
汽车工程
计算机科学
网格
环境科学
工艺工程
可靠性工程
功率(物理)
工程类
电气工程
数学
物理
几何学
量子力学
作者
Sun Liang,Jiawen Li,Lidong Chen,Jiaming Xi,Benxin Li
摘要
With the increasing building energy consumption, building integrated photovoltaic has emerged. However, this method has problems such as low photovoltaic absorption rate and large load peak–valley difference. For this reason, the authors have constructed a building integrated photovoltaic-phase change material system considering the demand response. Under the demand response at the time of use, the system was powered by building photovoltaic power generation. The thermostatically controlled load demand inside buildings was satisfied jointly by the phase change energy storage and the air conditioning. The system can run offline or connected to the grid through surplus electricity. When electricity is insufficient, the system can purchase it from the grid. The system dispatching strategy is also given. Based on the principles of minimising the daily cost of system operation, maximising the photovoltaic absorption rate, and minimising the peak–valley difference, a multi-objective optimisation model is established, and the particle swarm algorithm is used to perform the capacity configuration on the energy storage system. Finally, case analysis was conducted to verify that the scheme is able to reduce the system operating cost by over 50%. In addition, it can greatly increase the photovoltaic absorption rate and reduce the peak–valley difference to achieve peak load shifting. The scheme has significant economic and technical benefits.
科研通智能强力驱动
Strongly Powered by AbleSci AI