Microstructure and mechanical properties of extruded and rolled Mg–Y–Zn–Ni–Co alloy

材料科学 合金 极限抗拉强度 微观结构 延展性(地球科学) 挤压 延伸率 冶金 层状结构 纹理(宇宙学) 相(物质) 晶界 复合材料 蠕动 化学 有机化学 人工智能 计算机科学 图像(数学)
作者
Haobin Xu,Jing Jiang,Guangli Bi,Shuaiju Meng,Xuezheng Zhang,Yuandong Li,Tijun Chen
出处
期刊:Journal of materials research and technology [Elsevier BV]
卷期号:27: 8323-8333 被引量:7
标识
DOI:10.1016/j.jmrt.2023.11.281
摘要

The as-cast Mg–2Y-0.5Zn-0.5Ni-0.5Co alloy (MYZNC, at%) underwent composite hot working, extrusion and rolling to further improve the mechanical properties, and the corresponding microstructure and mechanical properties were also investigated. The extruded and rolled MYZNC alloy (MYZNC-R) consisted of α-Mg, a long period stacking order (LPSO) phase comprising lamellar and fine block 18R LPSO phase as well as a thin strip 14H LPSO phase, along small amounts of Mg2Y, MgY(Co,Zn,Ni)4 and Mg3(Co,Zn,Ni,Y) particle phases. After composite processing, the dispersion and amounts of LPSO phase in the alloy was significantly enhanced, accompanied by a substantial introduction of low angle grain boundaries (LAGBs) during rolling process. The MYZNC-R alloy exhibited the high mechanical properties, with an ultimate tensile strength (σb) of 350 MPa, a yield strength (σ0.2) of 305 MPa and an elongation to failure (εf) of 10.6 %. In comparison to the extruded MYZNC alloy, both σb and σ0.2 demonstrated significant improvements by 25 % and 35.6 %, respectively. The elongation to failure only decreased by mere 1 %, indicating that the alloy had a good strength-plasticity. The high tensile strengths of MYZNC-R alloy were mainly attributed to grain refinement, LPSO phase strengthening and texture strengthening. The good ductility of MYZNC-R alloy was associated with the coordinated deformed LPSO phase and the formation of a high-volume fraction (∼76.5 %) of LAGBs.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
脑洞疼的应助被Chllerye采纳,获得10
刚刚
1秒前
yuzu发布了新的文献求助10
1秒前
ding的应助被查找文献中采纳,获得10
2秒前
zz发布了新的文献求助10
2秒前
Orange的应助被tulip采纳,获得10
3秒前
zeyiyang完成签到,获得积分10
3秒前
酷波er的应助被李佳佳采纳,获得10
4秒前
kim完成签到 ,获得积分10
4秒前
5秒前
5秒前
5秒前
桐桐的应助被如意幼枫采纳,获得10
5秒前
jjjjj完成签到,获得积分20
5秒前
6秒前
合适雅绿完成签到,获得积分10
7秒前
丘比特的应助被小猛人采纳,获得10
7秒前
橙子完成签到,获得积分10
7秒前
7秒前
arniu2008的应助被JiaYouguo采纳,获得20
8秒前
茶荼发布了新的文献求助10
8秒前
小马甲的应助被白果采纳,获得10
9秒前
psychedeng完成签到,获得积分10
9秒前
ppp发布了新的文献求助10
9秒前
9秒前
summer烨完成签到,获得积分10
9秒前
miaotiao发布了新的文献求助10
10秒前
明明完成签到 ,获得积分10
11秒前
shen5690完成签到 ,获得积分10
11秒前
11秒前
Wang发布了新的文献求助10
12秒前
科研通AI65的应助被周一采纳,获得10
12秒前
深情安青的应助被匆匆采纳,获得10
12秒前
12秒前
Liana_Liu发布了新的文献求助200
13秒前
mie完成签到,获得积分10
15秒前
完美世界的应助被木子采纳,获得10
15秒前
。。完成签到 ,获得积分10
16秒前
16秒前
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8193925
求助须知:如何正确求助?哪些是违规求助? 9579945
关于积分的说明 21868504
捐赠科研通 7793568
什么是DOI,文献DOI怎么找? 3437462
关于科研通互助平台的介绍 2560923
邀请新用户注册赠送积分活动 2484250