Microplastics generation and concentration during mechanical-biological treatment of mixed municipal solid waste

Mechanical-biological treatment (MBT) is a popular solution for the processing of mixed municipal solid waste (MSW). However, it is assumed that the treatment processes can lead to the generation of microplastics in large quantities and their concentration in the organic output. Organic outputs from MBT as a source of microplastics are still poorly understood. The current article aims to fill this gap and investigate microplastics formation during MBT and their abundance in ready stabilized organic output. Seasonal samples were taken from the four stages of the possible microplastics pathway in MBT to study changes in microplastics numerical and mass concentration, shape and size. Large microplastics were identified by Fourier transform infrared spectroscopy , and small microplastics by Nile Red dye staining method. The results showed that both mechanical pre-treatment and aerobic treatment had a significant impact on microplastics formation, while mechanical post-treatment only resulted in the enrichment of the output with microplastics. Moreover, microplastics became finer during treatment. Microplastics abundance in ready organic output ranged from 8925 ± 1344 particles/kg in winter 2021 to 17407 ± 4319 particles/kg in summer 2020, and up to 160.5 t of microplastics were emitted from the Kaunas MBT treatment facility during the study year. In addition, a relationship between the microplastics abundance and plastic content of the incoming waste was found by a regression analysis. Therefore, to reduce the formation and emission of microplastics by MBT, the organic fraction of MSW should be collected and treated separately. • Stabilized organic waste output from MBT is a significant source of microplastics. • Shredding and composting of mixed MSW cause microplastics generation. • Microplastics emission from the Kaunas MBT can reach 160.5 tons per year. • Plastic content in the incoming waste affects the number of generated microplastics. • MBT processes lead to a decrease in microplastics size.