情态动词
残余物
桥(图论)
模式(计算机接口)
表面光洁度
结构工程
点(几何)
阻尼比
模态分析
声学
工程类
有限元法
计算机科学
材料科学
数学
振动
几何学
算法
物理
机械工程
医学
高分子化学
内科学
操作系统
作者
Yi He,Judy P. Yang,Jiuquan Chen
标识
DOI:10.1007/s42417-022-00724-4
摘要
PurposeThis study presents a method to estimate the bridge frequencies, damping ratios and mode shapes from the responses of two connected single-axle vehicles. As the bridge pavement roughness is the main excitation for a passing vehicle, the roughness-related components can seriously overshadow the bridge modal parameters contained in the vehicle responses. Although the residual response from two-connected vehicles has been adopted to remove the roughness-related components in the identification of bridge frequencies, the estimation of bridge damping ratios and mode shapes from the residual response is not fully explored yet.MethodsA semi-analytical solution is first derived to understand the frequency content of a contact-point residual response; then, the two contact-point responses are back-calculated from the vehicle responses. Subsequently, the singular spectrum analysis is conducted to exact the bridge frequency-related mono-components, from which the bridge damping ratios are estimated by curve-fitting while the mode shapes are constructed by Hilbert transform.ResultsThe numerical results show that the proposed method enables the estimation of the first two bridge damping ratios and the construction of the first mode shape with satisfactory accuracy.ConclusionThe proposed method can effectively remove the adverse effect of pavement roughness and efficiently construct the mode shapes of bridge in consideration of bridge damping ratios.
科研通智能强力驱动
Strongly Powered by AbleSci AI