二苯并噻吩
催化作用
响应面法
氧化法
化学
过程(计算)
工艺优化
化学工程
材料科学
计算机科学
有机化学
色谱法
工程类
操作系统
作者
Bijan Barghi,Martin Jürisoo,Maria Volokhova,Liis Seinberg,Indrek Reile,Valdek Mikli,Allan Niidu
出处
期刊:ACS omega
[American Chemical Society]
日期:2022-05-02
卷期号:7 (19): 16288-16297
被引量:20
标识
DOI:10.1021/acsomega.1c05965
摘要
High Resolution Image Download MS PowerPoint Slide This research investigates the catalytic performance of a metal–organic framework (MOF) with a functionalized ligand─UiO-66-NH 2 ─in the oxidative desulfurization of dibenzothiophene (DBT) in n -dodecane as a model fuel mixture (MFM). The solvothermally prepared catalyst was characterized by XRD, FTIR, 1 H NMR, SEM, TGA, and MP-AES analyses. A response surface methodology was employed for the experiment design and variable optimization using central composite design (CCD). The effects of reaction conditions on DBT removal efficiency, including temperature ( X 1 ), oxidant agent over sulfur (O/S) mass ratio ( X 2 ), and catalyst over sulfur (C/S) mass ratio ( X 3 ), were assessed. Optimal process conditions for sulfur removal were obtained when the temperature, O/S mass ratio, and C/S mass ratio were 72.6 °C, 1.62 mg/mg, and 12.1 mg/mg, respectively. Under these conditions, 89.7% of DBT was removed from the reaction mixture with a composite desirability score of 0.938. From the results, the temperature has the most significant effect on the oxidative desulfurization reaction. The model F values gave evidence that the quadratic model was well-fitted. The reusability of the MOF catalyst in the ODS reaction was tested and demonstrated a gradual loss of activity over four runs.
科研通智能强力驱动
Strongly Powered by AbleSci AI