This paper develops a revised mathematical solution framework for the chemistry challenge "Can continuous wearable chemical sensing measure clinically useful molecular biomarkers for months?". The proposed Regenerative Long-Horizon Wearable Sensor Model (RLHWSM) was constructed after an earlier formulation failed or remained only partially supported. The specific failure was: The original month-scale model assumed monotonic sensor decay and no active regeneration. The revision is: Use a two-timescale longevity model: passive anti-fouling stability plus active in-situ regeneration/recalibration events. The resulting central relation is dη/dt=-k_foulη; η(t_r+)=R_regenη0; calibration state b(t) updated at regeneration. Unlike a generic logarithmic template, the present model is tied to problem-specific state variables, an explicit inference or decision rule, and a falsification protocol. External validation is based on primary research studies selected for direct relevance to the variables or decision represented by the model. Regenerable sweat sensing is validated to 21 days; an independent biochemical sensor is stable for at least 1 month in undiluted serum, supporting the longevity architecture. Months-long wearable molecular monitoring remains unproven. The key quantitative or operational anchor is: Regenerable wearable: up to 21 days; protected biochemical sensor: ≥1 month stability in undiluted serum. The paper distinguishes model validation from completion of the full grand target: a model may pass by correctly predicting a partial, negative, or unresolved experimental state. We derive the model, analyze identifiability and sensitivity, formulate prospective tests, and state conditions under which the model must be rejected or expanded.