Numerical Simulation Study on the Dynamics of Bluff-Body Flames under Oxygen-Lean Conditions

As modern aeroengine combustors advance towards high temperatures, afterburners are inevitably affected by diminished oxygen content in incoming flows, thus affecting combustion efficiency, instability, and flammability limits. In this study, the dynamic combustion characteristics of V-shaped bluff body-stabilised diffusion flames were investigated using a large eddy simulation method with an oxygen mass fraction range of 14–23% and temperatures ranging from 900 to 1100 K. The results show the significant effects of oxygen content and inflow temperature on the flame/flow behaviours downstream of the bluff-body flame holder. In a separated shear layer, two distinct modes of flow/flame shedding are observed when varying the oxygen content and inflow temperature. The results show that BVK instability governs the far-field wake flow/flame features, whereas the oxygen concentration and temperature significantly affect their oscillation amplitudes. In addition, variations in the incoming oxygen content and temperature shift the axial position of the transition from KH instability to BVK instability. Finally, a spectral analysis is conducted to investigate the characteristics of pressure and heat release pulsations under different scenarios. This study highlights the importance of oxygen content on the combustion dynamics of bluff body-stabilised diffusion flames at various temperatures, which is essential for optimising combustion efficiency and stability in practical applications.